You are looking at the documentation of a prior release. To read the documentation of the latest release, please visit here.

New to Voyager? Please start here.

TLS Authentication

This example demonstrates how to configure TLS Authentication on Voyager Ingress controller.

Before diving into the deep learn about TLS Auth with HAProxy.

Using TLS Authentication

Voyager Ingress read ca certificates from files stored on secrets with ca.crt key.

  • ingress.appscode.com/auth-tls-secret: Name of secret for TLS client certification validation.
  • ingress.appscode.com/auth-tls-error-page: The page that user should be redirected in case of Auth error
  • ingress.appscode.com/auth-tls-verify-client: Enables verification option of client certificates.

Configure

Create tls secret for enable ssl termination:

$ kubectl create secret tls server --cert=/path/to/cert/file --key=/path/to/key/file

Create ca cert secret:

$ kubectl create secret generic ca --from-file=/path/to/ca.crt

Create an Ingress with TLS Auth annotations:

apiVersion: voyager.appscode.com/v1beta1
kind: Ingress
metadata:
  annotations:
    ingress.appscode.com/auth-tls-secret: ca
    ingress.appscode.com/auth-tls-verify-client: required
    ingress.appscode.com/auth-tls-error-page: "https://auth.example.com/errors.html"
  name: hello-tls-auth
  namespace: default
spec:
  tls:
  - ref:
      kind: Secret
      name: server
    hosts:
    - auth.example.com
  rules:
  - host: auth.example.com
    http:
      paths:
      - path: /testpath
        backend:
          serviceName: test-server
          servicePort: 80

Test without certificates:

$ curl -i -vvv 'https://auth.example.com'
* Hostname was NOT found in DNS cache
*   Trying 192.168.99.100...
* Connected to http.appscode.test (192.168.99.100) port 443 (#0)
* successfully set certificate verify locations:
*   CAfile: none
  CApath: /etc/ssl/certs
* SSLv3, TLS handshake, Client hello (1):
* SSLv3, TLS handshake, Server hello (2):
* SSLv3, TLS handshake, CERT (11):
* SSLv3, TLS handshake, Server key exchange (12):
* SSLv3, TLS handshake, Request CERT (13):
* SSLv3, TLS handshake, Server finished (14):
* SSLv3, TLS handshake, CERT (11):
* SSLv3, TLS handshake, Client key exchange (16):
* SSLv3, TLS change cipher, Client hello (1):
* SSLv3, TLS handshake, Finished (20):
* SSLv3, TLS alert, Server hello (2):
* error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure
* Closing connection 0
curl: (35) error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure

Send a valid client certificate:

$ curl -v -s --key client.key --cert client.crt https://auth.example.com
HTTP/1.1 200 OK
Date: Fri, 08 Sep 2017 09:31:43 GMT
Content-Length: 0
Content-Type: text/plain; charset=utf-8

Send a invalid client certificate, that will redirect to error page if provided:

$ curl -v -s --key invalidclient.key --cert invalidclient.crt https://auth.example.com
HTTP/1.1 302
Location: https://auth.example.com/errors.html

Using TLS Auth In Frontend

Basic Auth can also be configured per frontend in voyager ingress via FrontendRules.

apiVersion: voyager.appscode.com/v1beta1
kind: Ingress
metadata:
  name: hello-basic-auth
  namespace: default
spec:
  frontendRules:
  - port: '8080'
    auth:
      tls:
        secretName: server
        verifyClient: required
        errorPage: "https://auth.example.com/error.html"
        headers:
          X-SSL-Client-CN: "%{+Q}[ssl_c_s_dn(cn)]"  # Add headers to Request based on SSL verification
          X-SSL:           "%[ssl_fc]",
  tls:
  - ref:
      kind: Secret
      name: server
    hosts:
    - auth.example.com
  rules:
  - host: auth.example.com
    http:
      paths:
      - path: /no-auth
        backend:
          serviceName: test-server
          servicePort: 80
  - host: auth.example.com
    http:
      port: '8080'
      paths:
      - path: /auth
        backend:
          serviceName: test-svc
          servicePort: 80

Request in non-tls port:

$ curl -v -s https://auth.example.com
HTTP/1.1 200 OK
Date: Fri, 08 Sep 2017 09:31:43 GMT
Content-Length: 0
Content-Type: text/plain; charset=utf-8

Test without certificates:

$ curl -i -vvv 'https://auth.example.com:8080'
* Hostname was NOT found in DNS cache
*   Trying 192.168.99.100...
* Connected to http.appscode.test (192.168.99.100) port 443 (#0)
* successfully set certificate verify locations:
*   CAfile: none
  CApath: /etc/ssl/certs
* SSLv3, TLS handshake, Client hello (1):
* SSLv3, TLS handshake, Server hello (2):
* SSLv3, TLS handshake, CERT (11):
* SSLv3, TLS handshake, Server key exchange (12):
* SSLv3, TLS handshake, Request CERT (13):
* SSLv3, TLS handshake, Server finished (14):
* SSLv3, TLS handshake, CERT (11):
* SSLv3, TLS handshake, Client key exchange (16):
* SSLv3, TLS change cipher, Client hello (1):
* SSLv3, TLS handshake, Finished (20):
* SSLv3, TLS alert, Server hello (2):
* error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure
* Closing connection 0
curl: (35) error:14094410:SSL routines:SSL3_READ_BYTES:sslv3 alert handshake failure

Send a valid client certificate:

$ curl -v -s --key client.key --cert client.crt https://auth.example.com:8080
HTTP/1.1 200 OK
Date: Fri, 08 Sep 2017 09:31:43 GMT
Content-Length: 0
Content-Type: text/plain; charset=utf-8

Backend server will receive Headers X-SSL and X-SSL-Client-CN.

Send a invalid client certificate, that will redirect to error page if provided:

$ curl -v -s --key invalidclient.key --cert invalidclient.crt https://auth.example.com:8080
HTTP/1.1 302
Location: https://auth.example.com/errors.html